مقاله

Ferrite material Characterization Using S-Parameters Data

دانلود متن کاملرایگان، با حساب کاربری؛ ثبت نام با گوگل چند ثانیه است

چکیده(به انگلیسی؛ چکیده‌ی فارسی در دسترس نیست)

ince many applications rely on the knowledge of the electromagnetic material properties of ferrites, such as ferrite phase shifters, this paper presents an algorithm for characterizing ferrite materials in a single frequency using a rectangular waveguide system. In this method, the extraction of ferrite parameters is implemented through minimizing the difference between the measured data and the results from modal analysis of the system. The main advantage of this method compared tothe other ones is that the proposed method only needs the amplitude of the reflection and transmission coefficients to estimate the parameters of ferrite materials. This makes the implementation easy and eliminates the problems associated with phase calibrations and measurements. This validation is achieved by simulation and experimental tests. The proposed algorithm is validated by characterizing YIG and SL-470 ferrites.

نویسندگان و وابستگی سازمانی
  1. M. MalekiORCID 0000-0001-8782-6494 — Electrical and Electronic Department , Malek Ashtar University of Technology, Tehran, Iran
  2. S.H. Mohseni ArmakiORCID 0000-0002-6777-5658 — Electrical and Electronic Department , Malek Ashtar University of Technology, Tehran, Iran
  3. E. HamidiORCID 0000-0001-7728-5727 — Electrical and Electronic Department , Malek Ashtar University of Technology, Tehran, Iran

شکل‌ها (۳)

  • Figure 1: Side view of the problem. Left side is the input and right side is the output pg empty waveguide extensions can be expanded to an right side is the output. infinite sum of the modal fields where the modal
    Figure 1: Side view of the problem. Left side is the input and right side is the output pg empty waveguide extensions can be expanded to an right side is the output. infinite sum of the modal fields where the modalصفحه‌ی ۲
  • شکل، صفحه‌ی ۳
    صفحه‌ی ۳
  • Figure 3: Measurement set up. x଴ = [4πMsi]
    Figure 3: Measurement set up. x଴ = [4πMsi]صفحه‌ی ۴

شکل‌ها از متن کامل مقاله برداشته شده‌اند و حقوقشان از آنِ نویسندگان و ناشر است. منبع: صفحه‌ی اصلی مقاله